Adjustable Surgical Electric Hydraulic Operating Table

What is the electro-hydraulic operating table?

3.1. Table lifting

The table lifting is controlled by the electric hydraulic system. If need to change the height of the operating table, you should press the controller table height up button, then table will automatically rise, and as long as you press the controller down key on the table , the table will automatic down. Lifting distance≥ 300 mm.

3.2. Head plate

The head plate can be at will adjusted within the adjustment range, and removable. If need to fold the head section up or down, just press inside the fastening handle rod and turn the cylinder handle of head plate to the required location, the head plate will lock automatically in this position. If need two fastening knob connected with the head section and back section are unscrewed and the head section will removed. 

3.3. Back Plate

If need to fold the back section up,you should press the back section up button，then it will fold up, If need to make the back section down，please press the back section down button。

3.4. Forward and backward tilt                  

If need to make the table forward, you should press the table forward button, then it lean forward. If need to make the table backward, please press the backward button. 

3.5. Lateral tilt

If need to make the table left tilt, you should press the left button, then it will turn to the left. If need to make the table toward the right, please press the right tilt button .